Home > Product > Power Management > Low-Dropout Voltage Regulator > XTR70010


  • Operational beyond the -60°C to +230°C temperature range.
  • Input voltages from 2.8V to 5.5V.
  • High output current with low dropout:1.5A @ 230°C with 1.9V dropout (1A with 1.2V dropout)
  • Up to 32 possible discrete output voltages from same part:
    • From 0.5V to 3.6V by step of 100mV.
  • Possible Vout selection based on an external resistive divider.
  • No minimum dropout imposed (current limited).
  • Low current consumption in full-power (1.3mA), low-power modes (550µA) and stand-by (<20μA @230°C) modes.
  • Output Overshoot Remover system.
  • Over current protection (hiccup mode).
  • Customer selectable Thermal Shutdown protection.
  • Customer selectable Thermal Shutdown threshold.
  • UVLO protection.
  • Power supply protection for insufficiently decoupled networks.
  • Accurate Bandgap reference (+/-4%).
  • Low noise under 30µVrms.
  • Soft startup and soft shutdown.
  • Stable over a wide range of load capacitance (10nF to 33µF).
  • Low temperature dependence (20 ppm/°C).
  • Excellent line regulation (<0.25% @ 230°C).
  • Excellent load regulation (<2.6%/A @ 230°C).
  • Monolithic design for high-reliability.
  • Latch-up free.
  • Ruggedized SMT and thru-hole packages.
  • Also available as bare die.

XTR70010 is a family of low-power voltage regulators/references designed for extreme reliability and high temperature applications. Being able to operate with input voltages from 2.8V to 5.5V, XTR70010 parts can source a current of 1.5A at +230°C while providing excellent regulation characteristics with a dropout as low as 1.9V. Moreover, it can supply a large range of output voltages from 0.5V to 3.6V thanks to an accurate current mode bandgap reference. Six protection systems are implemented to ensure a good operation and reliability of the circuit: UVLO, Short-circuit hiccup mode, thermal shutdown, fast output overshoot killer, soft turn-off and power supply supervision in case of bad input decoupling. XTR70010 parts can be used on a wide range of applications such as high fan-out and low dropout regulators/references, adjustable power supply, current sources, as well as precision bridge excitation. Special design techniques were used allowing XTR70010 parts to offer a precise, robust and reliable operation in critical applications. Full functionality is guaranteed from -60°C to +230°C, though operation well below and above this temperature range is achieved. XTR70010 parts have been designed to reduce system cost and ease adoption by reducing the learning curve and providing smart and easy to use features. Parts from the XTR70010 family are available in ruggedized SMT and thru-hole packages. Parts are also available as bare dies.
Back to top

  • Reliability-critical, Automotive, Aeronautics & Aerospace, Down-hole.
  • High-efficiency regulated power supplies, bridge excitation, cable- or battery-powered applications.
Back to top


Product Reference Temperature Range Package Pin Count Marking
XTR70010-TD-60°C to +230°CTested bare dieXTR70010
XTR70011-FE-60°C to +230°CGull-wing flat pack with ePad10XTR70011
XTR70015-D-60°C to +230°CCeramic side brazed DIP8XTR70015

       Other packages and packaging configurations possible upon request.
Back to top

Documentation :
Datasheet :

DS-00297-12-XTR70010-High-Temperature, 1

Application Notes :

Demo Boards :

Buy   Sample & Purchase Request Quote
Cross-references Search